ReadMeFeed / Community knowledge
Real questions. Useful conversations. Find the people who know your stack.
Use Hyper-V Private Virtual Switches to isolate sensitive VM-to-VM traffic from the host OS and external network, with static IP configuration and verification steps.
When you expose virtual machines to a production network, the Hyper‑V virtual switch is the first line of defense. This guide walks through the minimal architecture that keeps traffic isolated, verifies operational health, and anticipates failure modes that could break connectivity.
Hyper-V Dynamic Memory can double VM density on a host, but only if you size Startup, Minimum, and Maximum RAM against real peak behavior. A worked 64 GB host example shows how.
An architectural deep dive into Windows 11's WSL2, explaining the utility VM, the 9P protocol for cross-OS file access, and how to manage memory boundaries via .wslconfig.
The goal is to configure Hyper‑V Replica so that a retry of a failed replication pass does not cause the same write to be applied twice on the replica VM. When a replication pass encounters a transient network error, Hyper‑V may retry the transfer of the changed blocks. If the retry resends blocks that were already partially committed, the replica could see
I've created a windows Hyper-V VM on a Windows 10 (X64) 2004 Pro host. I'm using the Hyper-V manager console, and the VM is working fine and has internet connectivity when using the default switch. I'm trying to configure it so that the VM receives IP address and gateway from the network DHCP, not from the Hyper-V. I've used the Virtual Switch Manager to cre
I am using hyper-v as a hypervisor and installed ubuntu 21 on it. There, whenever I start the VM, the eth0 (only one network interface connected,Default Switch of Hyper-v) is not getting IP and showing as down. Please bare with my snaps, as I can't ssh to the machine to copy the output and paste here as text. There is no /etc/network/interfaces file on my ma
powershell