Admission Webhook Good Practices

Recommendations for designing and deploying admission webhooks in Kubernetes.

This page provides good practices and considerations when designing admission webhooks in Kubernetes. This information is intended for cluster operators who run admission webhook servers or third-party applications that modify or validate your API requests.

Before reading this page, ensure that you're familiar with the following concepts:

• Admission controllers
• Admission webhooks

Importance of good webhook design

Admission control occurs when any create, update, or delete request is sent to the Kubernetes API. Admission controllers intercept requests that match specific criteria that you define. These requests are then sent to mutating admission webhooks or validating admission webhooks. These webhooks are often written to ensure that specific fields in object specifications exist or have specific allowed values.

Webhooks are a powerful mechanism to extend the Kubernetes API. Badly-designed webhooks often result in workload disruptions because of how much control the webhooks have over objects in the cluster. Like other API extension mechanisms, webhooks are challenging to test at scale for compatibility with all of your workloads, other webhooks, add-ons, and plugins.

Additionally, with every release, Kubernetes adds or modifies the API with new features, feature promotions to beta or stable status, and deprecations. Even stable Kubernetes APIs are likely to change. For example, the Pod API changed in v1.29 to add the Sidecar containers feature. While it's rare for a Kubernetes object to enter a broken state because of a new Kubernetes API, webhooks that worked as expected with earlier versions of an API might not be able to reconcile more recent changes to that API. This can result in unexpected behavior after you upgrade your clusters to newer versions.

This page describes common webhook failure scenarios and how to avoid them by cautiously and thoughtfully designing and implementing your webhooks.

Identify whether you use admission webhooks

Even if you don't run your own admission webhooks, some third-party applications that you run in your clusters might use mutating or validating admission webhooks.

To check whether your cluster has any mutating admission webhooks, run the following command:

kubectl get mutatingwebhookconfigurations

The output lists any mutating admission controllers in the cluster.

To check whether your cluster has any validating admission webhooks, run the following command:

kubectl get validatingwebhookconfigurations

The output lists any validating admission controllers in the cluster.

Choose an admission control mechanism

Kubernetes includes multiple admission control and policy enforcement options. Knowing when to use a specific option can help you to improve latency and performance, reduce management overhead, and avoid issues during version upgrades. The following table describes the mechanisms that let you mutate or validate resources during admission:

Mutating and validating admission control in Kubernetes

Mechanism	Description	Use cases
Mutating admission webhook	Intercept API requests before admission and modify as needed using custom logic.	Make critical modifications that must happen before resource admission. Make complex modifications that require advanced logic, like calling external APIs.
Mutating admission policy	Intercept API requests before admission and modify as needed using Common Expression Language (CEL) expressions.	Make critical modifications that must happen before resource admission. Make simple modifications, such as adjusting labels or replica counts.
Validating admission webhook	Intercept API requests before admission and validate against complex policy declarations.	Validate critical configurations before resource admission. Enforce complex policy logic before admission.
Validating admission policy	Intercept API requests before admission and validate against CEL expressions.	Validate critical configurations before resource admission. Enforce policy logic using CEL expressions.

In general, use webhook admission control when you want an extensible way to declare or configure the logic. Use built-in CEL-based admission control when you want to declare simpler logic without the overhead of running a webhook server. The Kubernetes project recommends that you use CEL-based admission control when possible.

Use built-in validation and defaulting for CustomResourceDefinitions

If you use CustomResourceDefinitions, don't use admission webhooks to validate values in CustomResource specifications or to set default values for fields. Kubernetes lets you define validation rules and default field values when you create CustomResourceDefinitions.

To learn more, see the following resources:

• Validation rules
• Defaulting

Performance and latency

This section describes recommendations for improving performance and reducing latency. In summary, these are as follows:

• Consolidate webhooks and limit the number of API calls per webhook.
• Use audit logs to check for webhooks that repeatedly do the same action.
• Use load balancing for webhook availability.
• Set a small timeout value for each webhook.
• Consider cluster availability needs during webhook design.

Design admission webhooks for low latency

Mutating admission webhooks are called in sequence. Depending on the mutating webhook setup, some webhooks might be called multiple times. Every mutating webhook call adds latency to the admission process. This is unlike validating webhooks, which get called in parallel.

When designing your mutating webhooks, consider your latency requirements and tolerance. The more mutating webhooks there are in your cluster, the greater the chance of latency increases.

Consider the following to reduce latency:

• Consolidate webhooks that perform a similar mutation on different objects.
• Reduce the number of API calls made in the mutating webhook server logic.
• Limit the match conditions of each mutating webhook to reduce how many webhooks are triggered by a specific API request.
• Consolidate small webhooks into one server and configuration to help with ordering and organization.

Prevent loops caused by competing controllers

Consider any other components that run in your cluster that might conflict with the mutations that your webhook makes. For example, if your webhook adds a label that a different controller removes, your webhook gets called again. This leads to a loop.

To detect these loops, try the following:

1. Update your cluster audit policy to log audit events. Use the following parameters:

   • level: RequestResponse
   • verbs: ["patch"]
   • omitStages: RequestReceived

   Set the audit rule to create events for the specific resources that your webhook mutates.

2. Check your audit events for webhooks being reinvoked multiple times with the same patch being applied to the same object, or for an object having a field updated and reverted multiple times.

Set a small timeout value

Admission webhooks should evaluate as quickly as possible (typically in milliseconds), since they add to API request latency. Use a small timeout for webhooks.

For details, see Timeouts.

Use a load balancer to ensure webhook availability

Admission webhooks should leverage some form of load-balancing to provide high availability and performance benefits. If a webhook is running within the cluster, you can run multiple webhook backends behind a Service of type ClusterIP.

Use a high-availability deployment model

Consider your cluster's availability requirements when designing your webhook. For example, during node downtime or zonal outages, Kubernetes marks Pods as NotReady to allow load balancers to reroute traffic to available zones and nodes. These updates to Pods might trigger your mutating webhooks. Depending on the number of affected Pods, the mutating webhook server has a risk of timing out or causing delays in Pod processing. As a result, traffic won't get rerouted as quickly as you need.

Consider situations like the preceding example when writing your webhooks. Exclude operations that are a result of Kubernetes responding to unavoidable incidents.

Request filtering

This section provides recommendations for filtering which requests trigger specific webhooks. In summary, these are as follows:

• Limit the webhook scope to avoid system components and read-only requests.
• Limit webhooks to specific namespaces.
• Use match conditions to perform fine-grained request filtering.
• Match all versions of an object.

Limit the scope of each webhook

Admission webhooks are only called when an API request matches the corresponding webhook configuration. Limit the scope of each webhook to reduce unnecessary calls to the webhook server. Consider the following scope limitations:

• Avoid matching objects in the kube-system namespace. If you run your own Pods in the kube-system namespace, use an objectSelector to avoid mutating a critical workload.
• Don't mutate node leases, which exist as Lease objects in the kube-node-lease system namespace. Mutating node leases might result in failed node upgrades. Only apply validation controls to Lease objects in this namespace if you're confident that the controls won't put your cluster at risk.
• Don't match TokenReview, SubjectAccessReview, or other virtual authentication and authorization resources. These are always read-only requests, and intercepting them might break your cluster. Starting with Kubernetes v1.37, admission webhooks are not called for these resources by default.
• Limit each webhook to a specific namespace by using a namespaceSelector.

Filter for specific requests by using match conditions

Admission controllers support multiple fields that you can use to match requests that meet specific criteria. For example, you can use a namespaceSelector to filter for requests that target a specific namespace.

For more fine-grained request filtering, use the matchConditions field in your webhook configuration. This field lets you write multiple CEL expressions that must evaluate to true for a request to trigger your admission webhook. Using matchConditions might significantly reduce the number of calls to your webhook server.

For details, see Matching requests: matchConditions.

Match all versions of an API

By default, admission webhooks run on any API versions that affect a specified resource. The matchPolicy field in the webhook configuration controls this behavior. Specify a value of Equivalent in the matchPolicy field or omit the field to allow the webhook to run on any API version.

For details, see Matching requests: matchPolicy.

Mutation scope and field considerations

This section provides recommendations for the scope of mutations and any special considerations for object fields. In summary, these are as follows:

• Patch only the fields that you need to patch.
• Don't overwrite array values.
• Avoid side effects in mutations when possible.
• Avoid self-mutations.
• Fail open and validate the final state.
• Plan for future field updates in later versions.
• Prevent webhooks from self-triggering.
• Don't change immutable objects.

Patch only required fields

Admission webhook servers send HTTP responses to indicate what to do with a specific Kubernetes API request. This response is an AdmissionReview object. A mutating webhook can add specific fields to mutate before allowing admission by using the patchType field and the patch field in the response. Ensure that you only modify the fields that require a change.

For example, consider a mutating webhook that's configured to ensure that web-server Deployments have at least three replicas. When a request to create a Deployment object matches your webhook configuration, the webhook should only update the value in the spec.replicas field.

Don't overwrite array values

Fields in Kubernetes object specifications might include arrays. Some arrays contain key:value pairs (like the envVar field in a container specification), while other arrays are unkeyed (like the readinessGates field in a Pod specification). The order of values in an array field might matter in some situations. For example, the order of arguments in the args field of a container specification might affect the container.

Consider the following when modifying arrays:

• Whenever possible, use the add JSONPatch operation instead of replace to avoid accidentally replacing a required value.
• Treat arrays that don't use key:value pairs as sets.
• Ensure that the values in the field that you modify aren't required to be in a specific order.
• Don't overwrite existing key:value pairs unless absolutely necessary.
• Use caution when modifying label fields. An accidental modification might cause label selectors to break, resulting in unintended behavior.

Avoid side effects

Ensure that your webhooks operate only on the content of the AdmissionReview that's sent to them, and do not make out-of-band changes. These additional changes, called side effects, might cause conflicts during admission if they aren't reconciled properly. The .webhooks[].sideEffects field should be set to None if a webhook doesn't have any side effect.

If side effects are required during the admission evaluation, they must be suppressed when processing an AdmissionReview object with dryRun set to true, and the .webhooks[].sideEffects field should be set to NoneOnDryRun.

For details, see Side effects.

Avoid self-mutations

A webhook running inside the cluster might cause deadlocks for its own deployment if it is configured to intercept resources required to start its own Pods.

For example, a mutating admission webhook is configured to admit create Pod requests only if a certain label is set in the Pod (such as env: prod). The webhook server runs in a Deployment that doesn't set the env label.

When a node that runs the webhook server Pods becomes unhealthy, the webhook Deployment tries to reschedule the Pods to another node. However, the existing webhook server rejects the requests since the env label is unset. As a result, the migration cannot happen.

Exclude the namespace where your webhook is running with a namespaceSelector.

Avoid dependency loops

Dependency loops can occur in scenarios like the following:

• Two webhooks check each other's Pods. If both webhooks become unavailable at the same time, neither webhook can start.
• Your webhook intercepts cluster add-on components, such as networking plugins or storage plugins, that your webhook depends on. If both the webhook and the dependent add-on become unavailable, neither component can function.

To avoid these dependency loops, try the following:

• Use ValidatingAdmissionPolicies to avoid introducing dependencies.
• Prevent webhooks from validating or mutating other webhooks. Consider excluding specific namespaces from triggering your webhook.
• Prevent your webhooks from acting on dependent add-ons by using an objectSelector.

Fail open and validate the final state

Mutating admission webhooks support the failurePolicy configuration field. This field indicates whether the API server should admit or reject the request if the webhook fails. Webhook failures might occur because of timeouts or errors in the server logic.

By default, admission webhooks set the failurePolicy field to Fail. The API server rejects a request if the webhook fails. However, rejecting requests by default might result in compliant requests being rejected during webhook downtime.

Let your mutating webhooks "fail open" by setting the failurePolicy field to Ignore. Use a validating controller to check the state of requests to ensure that they comply with your policies.

This approach has the following benefits:

• Mutating webhook downtime doesn't affect compliant resources from deploying.
• Policy enforcement occurs during validating admission control.
• Mutating webhooks don't interfere with other controllers in the cluster.

Plan for future updates to fields

In general, design your webhooks under the assumption that Kubernetes APIs might change in a later version. Don't write a server that takes the stability of an API for granted. For example, the release of sidecar containers in Kubernetes added a restartPolicy field to the Pod API.

Prevent your webhook from triggering itself

Mutating webhooks that respond to a broad range of API requests might unintentionally trigger themselves. For example, consider a webhook that responds to all requests in the cluster. If you configure the webhook to create Event objects for every mutation, it'll respond to its own Event object creation requests.

To avoid this, consider setting a unique label in any resources that your webhook creates. Exclude this label from your webhook match conditions.

Don't change immutable objects

Some Kubernetes objects in the API server can't change. For example, when you deploy a static Pod, the kubelet on the node creates a mirror Pod in the API server to track the static Pod. However, changes to the mirror Pod don't propagate to the static Pod.

Don't attempt to mutate these objects during admission. All mirror Pods have the kubernetes.io/config.mirror annotation. To exclude mirror Pods while reducing the security risk of ignoring an annotation, allow static Pods to only run in specific namespaces.

Mutating webhook ordering and idempotence

This section provides recommendations for webhook order and designing idempotent webhooks. In summary, these are as follows:

• Don't rely on a specific order of execution.
• Validate mutations before admission.
• Check for mutations being overwritten by other controllers.
• Ensure that the set of mutating webhooks is idempotent, not just the individual webhooks.

Don't rely on mutating webhook invocation order

Mutating admission webhooks don't run in a consistent order. Various factors might change when a specific webhook is called. Don't rely on your webhook running at a specific point in the admission process. Other webhooks could still mutate your modified object.

The following recommendations might help to minimize the risk of unintended changes:

• Validate mutations before admission
• Use a reinvocation policy to observe changes to an object by other plugins and re-run the webhook as needed. For details, see Reinvocation policy.

Ensure that the mutating webhooks in your cluster are idempotent

Every mutating admission webhook should be idempotent. The webhook should be able to run on an object that it already modified without making additional changes beyond the original change.

Additionally, all of the mutating webhooks in your cluster should, as a collection, be idempotent. After the mutation phase of admission control ends, every individual mutating webhook should be able to run on an object without making additional changes to the object.

Depending on your environment, ensuring idempotence at scale might be challenging. The following recommendations might help:

• Use validating admission controllers to verify the final state of critical workloads.
• Test your deployments in a staging cluster to see if any objects get modified multiple times by the same webhook.
• Ensure that the scope of each mutating webhook is specific and limited.

The following examples show idempotent mutation logic:

1. For a create Pod request, set the field .spec.securityContext.runAsNonRoot of the Pod to true.

2. For a create Pod request, if the field .spec.containers[].resources.limits of a container is not set, set default resource limits.

3. For a create Pod request, inject a sidecar container with name foo-sidecar if no container with the name foo-sidecar already exists.

In these cases, the webhook can be safely reinvoked, or admit an object that already has the fields set.

The following examples show non-idempotent mutation logic:

1. For a create Pod request, inject a sidecar container with name foo-sidecar suffixed with the current timestamp (such as foo-sidecar-19700101-000000).

   Reinvoking the webhook can result in the same sidecar being injected multiple times to a Pod, each time with a different container name. Similarly, the webhook can inject duplicated containers if the sidecar already exists in a user-provided pod.

2. For a create/update Pod request, reject if the Pod has label env set, otherwise add an env: prod label to the Pod.

   Reinvoking the webhook will result in the webhook failing on its own output.

3. For a create Pod request, append a sidecar container named foo-sidecar without checking whether a foo-sidecar container exists.

   Reinvoking the webhook will result in duplicated containers in the Pod, which makes the request invalid and rejected by the API server.

Mutation testing and validation

This section provides recommendations for testing your mutating webhooks and validating mutated objects. In summary, these are as follows:

• Test webhooks in staging environments.
• Avoid mutations that violate validations.
• Test minor version upgrades for regressions and conflicts.
• Validate mutated objects before admission.

Test webhooks in staging environments

Robust testing should be a core part of your release cycle for new or updated webhooks. If possible, test any changes to your cluster webhooks in a staging environment that closely resembles your production clusters. At the very least, consider using a tool like minikube or kind to create a small test cluster for webhook changes.

Ensure that mutations don't violate validations

Your mutating webhooks shouldn't break any of the validations that apply to an object before admission. For example, consider a mutating webhook that sets the default CPU request of a Pod to a specific value. If the CPU limit of that Pod is set to a lower value than the mutated request, the Pod fails admission.

Test every mutating webhook against the validations that run in your cluster.

Test minor version upgrades to ensure consistent behavior

Before upgrading your production clusters to a new minor version, test your webhooks and workloads in a staging environment. Compare the results to ensure that your webhooks continue to function as expected after the upgrade.

Additionally, use the following resources to stay informed about API changes:

• Kubernetes release notes
• Kubernetes blog

Validate mutations before admission

Mutating webhooks run to completion before any validating webhooks run. There is no stable order in which mutations are applied to objects. As a result, your mutations could get overwritten by a mutating webhook that runs at a later time.

Add a validating admission controller like a ValidatingAdmissionWebhook or a ValidatingAdmissionPolicy to your cluster to ensure that your mutations are still present. For example, consider a mutating webhook that inserts the restartPolicy: Always field to specific init containers to make them run as sidecar containers. You could run a validating webhook to ensure that those init containers retained the restartPolicy: Always configuration after all mutations were completed.

For details, see the following resources:

• Validating Admission Policy
• ValidatingAdmissionWebhooks

Mutating webhook deployment

This section provides recommendations for deploying your mutating admission webhooks. In summary, these are as follows:

• Gradually roll out the webhook configuration and monitor for issues by namespace.
• Limit access to edit the webhook configuration resources.
• Limit access to the namespace that runs the webhook server, if the server is in-cluster.

Install and enable a mutating webhook

When you're ready to deploy your mutating webhook to a cluster, use the following order of operations:

1. Install the webhook server and start it.
2. Set the failurePolicy field in the MutatingWebhookConfiguration manifest to Ignore. This lets you avoid disruptions caused by misconfigured webhooks.
3. Set the namespaceSelector field in the MutatingWebhookConfiguration manifest to a test namespace.
4. Deploy the MutatingWebhookConfiguration to your cluster.

Monitor the webhook in the test namespace to check for any issues, then roll the webhook out to other namespaces. If the webhook intercepts an API request that it wasn't meant to intercept, pause the rollout and adjust the scope of the webhook configuration.

Limit edit access to mutating webhooks

Mutating webhooks are powerful Kubernetes controllers. Use RBAC or another authorization mechanism to limit access to your webhook configurations and servers. For RBAC, ensure that the following access is only available to trusted entities:

• Verbs: create, update, patch, delete, deletecollection
• API group: admissionregistration.k8s.io/v1
• API kind: MutatingWebhookConfigurations

If your mutating webhook server runs in the cluster, limit access to create or modify any resources in that namespace.

Examples of good implementations

Note: This section links to third party projects that provide functionality required by Kubernetes. The Kubernetes project authors aren't responsible for these projects, which are listed alphabetically. To add a project to this list, read the content guide before submitting a change. More information.

The following projects are examples of "good" custom webhook server implementations. You can use them as a starting point when designing your own webhooks. Don't use these examples as-is; use them as a starting point and design your webhooks to run well in your specific environment.

• cert-manager
• Gatekeeper Open Policy Agent (OPA)