ReadMeFeed / Community knowledge
Real questions. Useful conversations. Find the people who know your stack.
Using virtual network "default" I get the guests on their own subnet, NAT'ed to the host's subnet. Using a separate bridge, it seems possible to have guests on the same subnet as the host, but apparently this requires a dedicated physical nic on the host? I have experimented with macvtap vepa or bridge, but could not get a link this way. Is it possible to ha
Asked · Aug 23
answered · Aug 23
When I need to create a temporary bridge with interface on Linux I would use the following: brctl addbr br0 brctl addif br0 eth0 ifconfig eth0 0.0.0.0 ifconfig br0 192.168.10.100 netmask 255.255.255.0 ifconfig br0 up I have been updating my process to use the ip command, However, I do not find the equivalent for removing the IP stack (ifconfig eth0 0.0.0.0)
I want to run a qemu-kvm guest with Debian 9 as its OS on a Debian 10 host. The host is connected to the local network, and I would like the guest to be "visible" to the local network as if it were a regular device connected directly to the network. To this end, I configured a bridge named br0 on the host by editing /etc/network/interfaces as follows: auto l
bash